Two Problems About Valve Body

Aug. 21, 2019

Here is a Stainless Steel Hollow Ball Manufacturer talking about two problems about valve body.

If you need any information about Balance Valve Ball, feel free to contact us.

Balance Valve Ball

Balance Valve Ball

Regarding the valve body, the following two problems will be mainly solved, specifically:

Question 1: How to choose the valve body material?

Question 2: In the electronically controlled hydraulic automatic transmission, how does the valve body disintegrate?

Since the above questions have been raised, then below, we will solve these two problems, hoping to give you some help and inspiration, and better understand the valve body.

How to choose the valve body material? According to the professional introduction, cast steel materials are generally used. If it is a special occasion, alloy materials are used.

In electronically controlled hydraulic automatic transmissions, the valve body is also an important part. If it fails, most of it is due to internal blockage. At this time, the valve body should be disassembled and cleaned to make it smooth. So how should we proceed? The following small series will give specific guidance.

Before removing the valve body, remove the external solenoid valve flat wire, remove the plug and harness, and place it properly. Then, remove the valve body and remove the connecting screw between the upper and lower valve bodies. Then, the valve body is placed in clean kerosene, cleaned with a carburetor cleaning agent, the oil stain is removed, and it is inspected for cracks, deformation, and the like.

When the valve body is cleaned, wipe it clean, then inject a small amount of automatic transmission oil for lubrication, and then assemble it.

If you want to know more about Stainless Steel Balance Valve Ball, welcome to follow our website.